Item code 62104
Floorfixx smart 8 mm 82.5 x 56.5 cm (2.80 m²)
The Floorfixx smart is an easy-to-install underlayment system that provides an insulating, even, and load-bearing substrate. Suitable for both residential and commercial applications.
The Floorfixx smart is an innovative underlayment system that utilizes a convenient tongue-and-groove connection to create an insulating, flat, and immediately load-bearing surface. It is perfect for both residential and commercial uses. Also, use the Floorfixx smart edge strips for a perfect start on the first row. It is designed for renovating poor subfloors with a minimum top layer thickness of 2.5 mm, including LVT Dryback, LVT Click, vinyl, carpet tiles, LVT Rigid with underlayment, and linoleum. No waiting or drying times are required, and it is ready to bear loads immediately. It levels out imperfections and provides maximum stability, complying with the 10 dB sound insulation standard set by the homeowners' association.
| Floor type | LVT Dryback / LVT Click / Vinyl / Carpet tiles / LVT Rigid with underlayment / Linoleum |
| Product weight | 4881 g/m² |
| Product dimensions (Length) | 82.5 cm |
| Product dimensions Width (Unit) | cm |
| Product dimensions in m2 | 2.8 m² |
| Sound-reducing - ΔLlin | 10 dB ΔLlin |
| Sound-reducing - ΔLlin - Test method | EN 13501-1:2007 + A1:2009 |
| Base unit | Pack |
| Thickness | 8 mm |
| Density | 610 kg/m³ |
| Material | Top layer: 3 mm MDFBottom layer: 3 mm MDF & 2.2 mm XPS foam |
| Brand | Floorfixx |
| Formaldehyde (Test method: EN 120) | E-1 |
| Leveling capacity | 2 mm over 2 m length |
| Thermal resistance - R-value | 0.123 m² K/W |
| TOG rating | 1.23 TOG |
| Thermal resistance - Test method | ISO 8302 |
| Suitable for underfloor heating | Yes |
| PC (Punctual Conformability) | 1<mm<2 |
| CS | CS2 |
| CS/CC (compressive Strength / Compressive Creep) | 240 kPa |
| Domestic use | Yes |
| Project use | Yes |
| Laying method | Floating |
| Product dimensions (Unit) | m² |
| Type of base floor | Wooden floor / Fixed sand cement floor / Floating screed |
| Bending strength (Test method: EN 310) | 40 N/mm² |
| Wheelchair load (Test method: EN 985) | Suitable |
| Sound-reducing - ΔLw | 20 dB ΔLw |
| Sound-reducing - ΔLw - Test method | EN 13501-1:2007 + A1:2009 |
| Flame-retardant | Bfl-S1 |
| Flame-retardant - Test method | EN 13501-1 |
| CS/CC (Compressive Strength / Compressive Creep) | 240 kPa |
Technical information
Installation instructions
Search
What are you looking for?
No results found.